Step | | Procedure & Parts & Tools |
1 |
|
Lift seat and tank lid
|
2 |
|
Using a T30 torx loosen screws on the underside of the tank lid
Torx T30 |
|
|
3 |
|
Put lid back down and then slightly shake until the inner lid and vacuum motor are lowered.
|
4 |
|
Using a flat head screwdriver loosen the connectors that the vacuum motor wires are connected to.
Screwdriver-flat tip |
|
|
5 |
|
Using a T25 torx remove the 3 screws on the vacuum motor plate and lift off.
Torx T25 |
|
|
6 |
|
The vacuum motor can now be lifted out.
|
7 |
|
Remove the gaskets and save them to use on the new vacuum motor.
|
8 |
|
Reverse steps to install new vacuum motor.
|